I was about to write, "with a minimum order under 250." I'd love to
get some from you guys. I can't seen needing more than four.
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Koa purflings? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=8745 |
Page 1 of 1 |
| Author: | James Orr [ Sun Oct 08, 2006 6:37 am ] |
| Post subject: | |
Does anyone know of a source for koa purflings? Or ideally, black/koa/ black or some similar purfling? |
|
| Author: | Brock Poling [ Sun Oct 08, 2006 7:10 am ] |
| Post subject: | |
Gurian. Lance and I are placing an order for these now. How many do you need? Maybe we could spare a few. |
|
| Author: | James Orr [ Sun Oct 08, 2006 7:31 am ] |
| Post subject: | |
| I was about to write, "with a minimum order under 250." I'd love to
get some from you guys. I can't seen needing more than four. |
|
| Author: | Shane Neifer [ Sun Oct 08, 2006 9:04 am ] |
| Post subject: | |
I have koa purfs but they are Koa/maple/Koa and are faily wide at .028/.012/.028 inches x .080. Alternatively you could purchase some koa bindings and cut your own purfs if you have a good saw and a nice blade. I know where you can get Koa bindings as well  !
Shane |
|
| Author: | D Stewart [ Sun Oct 08, 2006 9:11 am ] |
| Post subject: | |
Brock, I just had to say that the spirit of this forum amazes me. People don't just share their knowledge, but their resourses. Swap, share, sell, or give. I see it all here in such a "family" atmosphere. You guys should be so proud of what you have here. Just had to suck up for a moment. Done. I bet those are great purflings.
Donovan |
|
| Author: | Steve Kinnaird [ Sun Oct 08, 2006 1:48 pm ] |
| Post subject: | |
James, you could always cut your own from Koa veneer. Or, better yet, just get Brock to send you some. 
Steve |
|
| Author: | old man [ Sun Oct 08, 2006 1:55 pm ] |
| Post subject: | |
James, Bobc, the zootster, will make up purfling any way you want it. Ron |
|
| Author: | James Orr [ Sun Oct 08, 2006 4:33 pm ] |
| Post subject: | |
Thanks a bunch! I had no idea BobC made purflings up. I should be getting my wood in from him this coming week. I love the spirit of this group of people too! |
|
| Author: | Serge Poirier [ Sun Oct 08, 2006 4:42 pm ] |
| Post subject: | |
Me too, i'll bet you guys didn't know it huh? 
|
|
| Author: | Anthony Z [ Sun Oct 08, 2006 10:40 pm ] |
| Post subject: | |
[QUOTE=James Orr] I had no idea BobC made purflings up.[/QUOTE] Neither did I, that rascal........... 
|
|
| Author: | James Orr [ Wed Oct 11, 2006 8:56 am ] |
| Post subject: | |
Thank you for your help, everyone. Shane is sending me some koa and black purfs that I'll be able to laminate on my own! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|